Description
About This Item: Crestron DM-MD16x16 DigitalMedia 16×16 Matrix Switcher
Cosmetically this system is in used sondition.
The unit powers on and has been tested, includes DMC-VID-RCA-A Component and DMC-VID4 composite video input cards. Some scratches on paint from installation/uninstallation in rack. Screen works great. See Photos.Technical Specifications of this system:
Maximum DM 8G® Cable Lengths | ||||
Cable Type: | ||||
Resolution: |
DM-CBL-ULTRA DigitalMedia™ Ultra Cable |
DM-CBL-8G DigitalMedia 8G™ Cable |
Third-Party CAT5e (or better) UTP or STP |
|
1080p60 Full HD | 330 ft (100 m) via any DM 8G+ cards |
|||
1920×1200 WUXGA | ||||
1600×1200 UXGA | ||||
2048×1080 2K DCI @24Hz | ||||
2048×1080 2K DCI @60Hz | 330 ft (100 m) via “4K” DM 8G+ cards |
230 ft (70 m) via “4K” DM 8G+ cards |
165 ft (50 m) via “4K” DM 8G+ cards |
|
2560×1440 WQHD | ||||
2560×1600 WQXGA | ||||
3840×2160 Ultra HD | ||||
4096×2160 4K DCI |
Cable Type: | |||||
Resolution: |
CRESFIBER8G CresFiber® 8G Multimode Fiber |
Third-Party OM3 Multimode Fiber |
CRESFIBER8G-SM CresFiber 8G Single-Mode Fiber |
Third-Party G.652.D (or better) Single-Mode Fiber |
|
1080p60 Full HD | 1000 ft (300 m) via DM 8G Fiber cards |
500 ft (150 m) via DM 8G Fiber cards |
7.5 miles (12 km) via DM 8G SM Fiber cards |
||
1920×1200 WUXGA | |||||
1600×1200 UXGA | |||||
2048×1080 2K DCI @24Hz |
Video | ||
Switcher | 16×16 digital matrix, modular input/output cards, Crestron QuickSwitch HD™ | |
Input Signal Types | Configurable via modular plug-in cards supporting HDMI® (DVI & Dual-Mode DisplayPort compatible [11]), DVI, 3G-SDI, RGB/VGA, component, S-Video, composite (NTSC & PAL), DM 8G+® & HDBaseT®, DM 8G Fiber, DM 8G SM Fiber, DM® CAT (legacy), DM Fiber (legacy), & H.264 streaming | |
Output Signal Types | Configurable via modular plug-in cards supporting HDMI (DVI compatible [14]), DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming (All input cards also include HDMI pass-through outputs) | |
Backplane Data Rate | 12.5 Gbps | |
Note: For additional specifications, please refer to the spec sheet for each input and output card. | ||
Audio | ||
Switcher | 16×16 digital multichannel audio-follow-video matrix switching, plus independent 16×16 stereo matrix for audio breakaway | |
Input Signal Types | Configurable via modular plug-in cards supporting HDMI (Dual-Mode DisplayPort compatible [11]), 3G-SDI, analog (stereo 2-channel), SPDIF, DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming | |
Output Signal Types | Configurable via modular plug-in cards supporting HDMI, analog (stereo 2-channel), DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming (All input cards also include HDMI pass-through outputs, and most digital audio input cards also include analog stereo pass-through audio outputs) | |
Note: For additional specifications, please refer to the spec sheet for each input and output card. | ||
Communications | ||
Ethernet | 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Private Network Mode | |
USB | USB signal routing via select input cards, transmitters, receivers, and extenders [15]; USB computer console port for setup | |
DigitalMedia | DM 8G+, DM 8G Fiber, DM 8G SM Fiber, DM Fiber, DM CAT, DMNet™, HDCP 2.2 [3], EDID, CEC, PoDM, PoDM+, Ethernet | |
HDBaseT | HDCP 2.2 [3], EDID, CEC, RS-232, PoH, Ethernet | |
HDMI | HDCP 2.2 [3], EDID, CEC | |
NOTE: Supports management of HDCP and EDID; supports management of CEC between connected HDMI and HDBaseT devices and a control system.[13] For additional specifications, please refer to the spec sheet for each input and output card. | ||
Card Slots | ||
1 – 16 | (16) DM switcher input card slots; Each slot accepts (1) DMC-series input card |
|
DM OUTPUTS 1 – 16 | (8) DM switcher output card slots; Each slot accepts (1) DMC-series output card |
|
Connectors | ||
LAN | (1) 8-pin RJ45 female; 10Base-T/100Base-TX/1000Base-T Ethernet port |
|
24ABG / EIG 1 – 16 | (16) sets of (1) 4-pin and (1) 3-pin 3.5 mm detachable terminal blocks; Comprises (16) DMNet ports with “EIG” power selection ports, each set is associated with the corresponding DM CAT output port on any installed DM CAT output card; Each DMNet port provides power and communications for a DM CAT device connected via DM cable; Each EIG port connects to an external power supply [16], or to the internal power source via a jumper, to power the DM CAT device connected to the corresponding DMNet port; Maximum Load: 40 Watts (1.66 Amps @ 24 Volts DC) per port, limited to the available DMNet power from the internal power supply (see “Power Requirements” below) or an external power supply [16] |
|
100-250V~7.0A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included |
|
G | (1) 6-32 screw, chassis ground lug | |
COMPUTER (front) | (1) USB Type B female; USB computer console port (6 ft cable included) |
|
Controls & Indicators | ||
LCD Display | Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight, displays inputs/outputs by name, video & audio signal information, Ethernet configuration and setup menus | |
SOFTKEYS | (4) Pushbuttons for activation of LCD driven functions | |
HW-R | (1) Recessed pushbutton for hardware reset, reboots the switcher | |
ROUTE | (1) Pushbutton and red LED, selects ROUTE mode to allow routing changes | |
VIEW | (1) Pushbutton and red LED, selects VIEW mode for viewing current routes | |
INFO | (1) Pushbutton and red LED, selects INFO mode for viewing AV and device info | |
MENU | (1) Pushbutton, steps menu back one level | |
ENTER | (1) Pushbutton, executes highlighted menu or value | |
AUDIO | (1) Pushbutton & red LED, selects audio routing view | |
VIDEO | (1) Pushbutton & red LED, selects video routing view | |
USB | (1) Pushbutton & red LED, selects USB routing view | |
Quick-Adjust Knob | (1) Continuous turn rotary encoder, adjusts menu parameters | |
IN 1 – 16 | (16) Pushbuttons and red LEDs, each selects the corresponding input for routing | |
OUT 1 – 16 | (16) Pushbuttons and red LEDs, each selects the corresponding output for routing | |
LAN (rear) | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | |
Power Requirements | ||
Main Power | 7 Amps @ 100-240 Volts AC, 50/60 Hz | |
Power Consumption | 440 Watts typical | |
Available DMNet Power | 110 Watts (4.6 Amps @ 24 Volts DC) from internal power supply | |
Available PoDM/PoH Power | Refer to the specifications for each DM 8G+ input and output card | |
Environmental | ||
Temperature | 32° to 104° F (0° to 40° C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 1500 BTU/hr | |
Ambient Noise | 31.5 to 36 dBA typical; 29 to 30 dBA idle |
|
Enclosure | ||
Chassis | Metal with black finish, vented sides, fan-cooled | |
Front Panel | Metal, black finish with polycarbonate label overlay | |
Mounting | Freestanding or 7 RU 19-inch rack-mountable (adhesive feet and rack ears included) | |
Dimensions | ||
Height | 12.22 in (311 mm) without feet | |
Width | 17.28 in (439 mm), 19.06 in (485 mm) with rack ears | |
Depth | 15.67 in (398 mm) without cards | |
Weight | ||
28.4 lb (12.9 kg) without cards |
Click here to search product certificates.
- All output types are configured in pairs except for streaming (a single streaming output occupies the space of two outputs of any other type). To configure a complete DM switcher with output and input cards, please use the online DigitalMedia Switcher Configuration Tool. Current DM switchers use DMC-series “single-gang” output cards. For older DM switchers with DMCO-series “multi-gang” output cards, please use the online Output Card Additions and Upgrades Tool to update your existing output cards and switcher to the new single-gang output card format.
- Crestron control via the DM network requires a Crestron control system, sold separately.
- 4K, Ultra HD, and HDCP 2.2 are currently supported over HDMI, DM 8G+, and HDBaseT using select input and output cards. Refer to the specifications for each input/output card and each connected device for its full capabilities.
- The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable, the choice of input/output card, and the resolution of the video signal. Refer to the “Maximum DM 8G Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment.
- The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m) using CRESFIBER8G multimode fiber optic cable, or 500 ft (150 m) using CRESFIBER (legacy) or third-party OM3 multimode fiber optic cable.
- The maximum cable length for DigitalMedia 8G Single-Mode Fiber (DM 8G SM Fiber) is 7.5 miles (12 km) using CRESFIBER8G-SM or third-party G.652.D (or better) single-mode fiber optic cable.
- The maximum cable length for DigitalMedia CAT (DM CAT) is 450 ft (137 m) using DM-CBL DigitalMedia Cable. Actual cable length depends upon multiple factors. Up to two DM Repeaters (Model DM-DR) may be required.
- The maximum cable length for DigitalMedia Fiber (DM Fiber) is 1000 ft (300 m) using CRESFIBER (legacy), CRESFIBER8G, or third-party OM2/OM3 duplex multimode fiber optic cable.
- Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. All wire and cables are sold separately.
- Streaming output supports 2-channel stereo audio only. Multichannel surround sound audio sources cannot be streamed unless downmixed to stereo. Stereo downmix capability requires a “DSP” type DM switcher input card, sold separately.
- Any HDMI input can support a DVI or Dual-Mode DisplayPort signal using a suitable adapter or interface cable.
- Item(s) sold separately.
- Control of third-party HDBaseT devices using CEC is only supported via “4K” DM 8G+ input and output cards.
- DVI output is supported via an HDMI output port using a suitable adapter or interface cable. CBL-HD-DVI interface cables are available separately.
- Manages the routing of USB HID signals between peripheral DM devices and input cards that are equipped with USB HID ports. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.
- For external DMNet power, use a Crestron CNPWS-75, C2N-SPWS300, or other Cresnet power supply as required. Do not interconnect DMNet with Cresnet.
-
- R2V3 : F3 , C4
-
- Contact Information: Reach out to us anytime through eBay messages for inquiries, comments, or product requests. eBay messages is the recommended channel.
- Business Hours: Monday-Friday 8:00 AM-5:00 PM PST, Saturday 11 AM – 3 PM. Closed on most US bank holidays. Expect a response within 1 business day.
- Making an Offer: Offers will only be considered if
submitted through eBay’s “Make Offer” function, and only for items where
this feature is enabled. Due to the large volume of messages about
offers, we will not be able to respond to messages regarding offers.
However, reasonable offers submitted using the tool will be considered. - Policies: Our shipping, payment, and other policies are on our eBay store’s about page. We recommend checking them periodically for updates.
- Commitment: We prioritize customer satisfaction, offering quick shipping and a 30-day money-back guarantee.
- Item Details: While we aim for clear product descriptions, we don?t offer detailed support for individual items. Please note, all products may lack manufacturer warranties. Returns are based on eBay’s policy within a 30-day window. We don?t disclose individual item details like service tags, serial numbers, etc.
- We do not provide ongoing technical support.
Shipping and Local Pickup
-
- Shipping Exclusions: We don’t ship on Saturdays, Sundays, or holidays. International shipping is through eBay’s International Shipping Program. Some items might have shipping restrictions. For domestic shipping, expect your item to be shipped within the next business day post payment clearance.
- Shipping Charges: Shipping fees are non-refundable unless an item offers free shipping. Typically, we utilize the FedEx for eBay shipping program.
- Combined Shipping: Orders are combined for environmental and cost efficiency. Splitting orders into multiple boxes isn’t possible.
- Local Pickup: Items can be picked up for free at our Portland location. After checkout and a minimum two-hour wait, instructions for pickup will be sent. Pickup hours mirror our business hours, excluding holidays.
Product Return Policy
-
- Quality Assurance: As an R2V3 compliant recycler, we ensure products match descriptions, testing and inventorying each, barring some vintage items.
- Returns: Contact us via eBay for any discrepancies or non-functioning products within 30 days of receipt. Full refunds are issued upon receiving and verifying the returned item. We don’t offer partial refunds or exchanges.
- Shipping for Returns: Shipping fees for returns aren’t covered by us unless specified. For international returns via the eBay Global Shipping Program, buyers cover return shipping, taxes, and import fees. Purchases made outside of this program using domestic freight forwarders should note that the 30-day return starts upon arrival at the forwarding location.
- Procedure: To assist us in processing returns efficiently, provide the serial number, describe the issue, and attach photos of the item (with our inventory label/serial number) and its packaging.
- Environment Concern: We’re conscious of the environmental impact of returns, which produce significant carbon dioxide emissions. Hence, buyer’s remorse or “changes of mind” aren’t accepted per eBay policy.
- Compliance: All returns adhere to eBay’s “Condition of returned items policy” and the “Abusive Buyer Policy”. We maintain comprehensive records of our products, including serial numbers, to ensure compliance and optimize customer experience.
R2v3 Testing and Grading
We are an R2V3 certified facility. All items are tested for functionality as per R2v3 standard and listed as.
We use the R2v3 R2 Equipment Categorization (REC) for item grading and to assign the cosmetic, functional, and data sanitization status to Collectible and Specialty Electronics, and Functional Products.
C0 | Not categorized
C1 | Damaged (For materials recovery)
C2 | Used Poor ? Heavy use and age · Cosmetic blemishes are significant, such as multiple heavy dents, may require repair · Damages to latches, hinges, keyboards, etc. are prevalent · Critical parts are missing
C3 | Used Fair (Moderate use and age) · Cosmetic blemishes are consistent with wear, including multiple dents, discoloration, and light to heavy scratches · Damage to latches, hinges, keyboards, etc. · Some parts, panels, bezels, or covers may be missing
C4 | Used Good · Cosmetic blemishes include scratches and/or other surface imperfections from consistent use, but equipment is in good condition overall · Minor wear of labeling may be visible · Small dents and small areas of discoloration may be present from the removal of tags · No damage to latches or hinges, nor any missing parts, panels, bezels, or covers
C5 | Used Very Good · Cosmetic blemishes include minor scratches and/or other surface imperfections from consistent use, but equipment is in good condition · Minor wear of labeling may be visible · Minor dents and areas of discoloration from the removal of tags · No missing parts
C6 | Used Excellent · Overall excellent cosmetic condition · May have light scratches or other minor blemishes from normal wear · Minor cosmetic blemishes have no impact on the system?s overall functionality or performance · Fully cleaned with all non-original labels removed · No missing parts
C7 | Certified Pre-Owned (Seller or Manufacturer Refurbished) · Used equipment that has been fully restored to like-new condition with warranty · Fully cleaned and cosmetically repaired with no blemishes · No missing parts
C8 | Unused · New, out of box, unused equipment removed from original packaging with no signs of wear or alteration
C9 | New Open Box · New, unused equipment in original packaging where factory seals have been broken · No signs of wear or alteration
Functionality Description Grades
F1 | Collectible or Specialty Equipment · Collectibles are rare, vintage, and no longer manufactured or supported by the OEM · Specialty equipment are rare and specialized equipment not generally available in retail · May have broken or missing parts
F2 | Verified Specialty Electronics · Verified removed from operation with no known defects in functionality · No physical damage or defects · No corrosion · No missing parts · Part numbers and serial numbers verified accurate
F3 | Key Functions Working · A subset of the primary functions of the device that an ordinary user of the device expects to function are verified working through manual or software tests · Software may not be loaded or configured · Hardware required for key functions to be tested may have been removed after testing (e.g. Hard Drive) · May be missing components or parts not essential to key functions · Secondary functions may not be tested or working · May not include Focus Materials (e.g. Battery) that are not working or not tested · All missing components or parts will be listed for each item
F4 | Hardware Functional · All hardware is tested and verified working through manual or software tests · No missing or damaged components or parts · Software not loaded or configured · No hardware defects
F5 | Refurbished · All functions tested and verified working through software tests · Loaded and configured with legally licensed software for full operations · Software test results are available · No hardware or software defects
F6 | Like New · All functions tested and verified working through software tests · Repaired with OEM original parts · Loaded and configured with original manufacturer?s legally licensed software for full operation · Meets OEM specifications for full original functionality · Software test results are available · Zero defects More information about these testing standards that we use can be found on the SERI website.
Item availability does change rapidly. Check our eBay store for the most up to date inventory.