Description
Erased, tested, and working. No reallocated sectors. Drives are raw and need to be formatted before use. Some cosmetic wear and tear may be present.
R2v3: F3C4
WD4000F9YZ Western Digital 3.5″ hard drive with a storage capacity of 4TB and featuring a SATA interface.
Western Digital WD4000F9YZ Technical Details:
- Hard Disk Model: WDC WD4000F9YZ
- Disk Family: Se
- Form Factor: 3.5″
- Capacity: 4 TB (4 x 1 000 000 000 000 bytes)
- Rotational Speed: 7200 RPM
- Rotation Time: 8.33 ms
- Average Rotational Latency: 4.17 ms
- Disk Interface: Serial-ATA/600
- Buffer-Host Max. Rate: 600 MB/seconds
- Buffer Size: 65536 KB
- Width: 101.6 mm (4.00 inch)
- Depth: 147 mm (5.79 inch)
- Height: 26.1 mm (1.03 inch)
- Weight: 750 grams (1.65 pounds)
- Manufacturer: Western Digital Corporation
More about our HDDs & SSDs
Our Hard Drives are sanitized and tested to the NIST 800-88 Rev. 1 standard before sale.
During this process, our drives are Tested for errors and Graded for performance and remaining life. All drives we sell are Grade A unless otherwise stated.
When you receive your hard drive, the drive will be in a RAW or factory new state and will need to be formatted by your system before use.
Device Grading:
During the erasure process, our drivers are tested for errors and graded based on performance, device SMART data, and overall usage.
Grade A:
- Overall drive health is above 80%
- No reallocated or pending sectors
- Power-on hours are under 50k hours
We do not offer Grade B drives.
